​Lomiko Metals (LMR: CA) to Expand Carbon Purity and Classification Testing at La Loutre

Spotlight Companies  |

Lomiko Metals Inc. (LMR: CA) and Canada Strategic Metals Inc. plan to conduct further graphite purity and characterization testing at La Loutre based on recent high-grade drill results. The only graphite purity and characterization information on the property was first reported September 24, 2014 from samples obtained previous to drilling campaigns at La Loutre. Testing material from the recent drill holes will provide more accurate information on material that has high purity, contains large flakes and is located near surface. This information will be valuable for the upcoming Pre-Economic Assessment (PEA).

On February 9th, 2016, Lomiko Metals and Canada Strategic announced a resource for the La Loutre Flake Graphite Property of 18.4 M Tonnes of 3.19% Indicated and 16.7 M Tonnes at 3.75% Flake Graphite Inferred with a cut-off of 1.5%. The sensitivity table also features 4.1 M Tonnes of 6.5% Indicated and 6.2 M Tonnes at 6.1% Flake Graphite Inferred with a cut-off of 3%. The results are all focused on the Graphene-Battery Zone.

A map of drill holes at the Refractory Zone which includes 2015 and 2016 results and highlights included 7.74% graphite over 135.60 metres including 16.81% graphite over 44.10 metres from hole LL-16-01, two different intersection in hole LL-16-02 reporting 17.08% graphite over 22.30 metres and 14.80% graphite over 15.10 metres and 110.80 metres of 14.56% Graphite in Hole LL-16-03.

The La Loutre property consists of contiguous claim blocks totalling approximately 2,867.29 hectares (28,67 km2) situated approximately 53 km east of Imerys Carbon and Graphite, formerly known as the Timcal Graphite Mine, North America's only operating graphite mine, and 117 km northwest of Montreal. Previous carbon purity and graphite characterization at La Loutre were encouraging:

 La Loutre graphite purity and classification results
US Mesh Sieve Size Sample #1 3.46%  Cg Size class  Grade, % Carbon
        -200              14.26%           Fine         100.00%    
200 - 100 mesh      22.12%           Small        100.00%    
    100-80 mesh            7.90%          Medium        100.00%    
    80-50  mesh           19.06%           Large        96.00%     
      >50 mesh            36.66%        Extra Large     87.72%     
    Total ( 200)          85.74%       Average Grade    94.74%     



US Mesh Sieve Size Sample #25.62%  Cg Size class  Grade, % Carbon
        -200              13.00%          Fine         100.00%    
200 - 100 mesh      21.26%          Small        98.15%     
    100-80 mesh           10.46%         Medium        97.56%     
    80-50  mesh           19.62%          Large        97.30%     
      >50 mesh            35.67%       Extra Large     96.15%     
    Total ( 200)          87.00%      Average Grade    97.45%     



US Mesh Sieve Size Sample #36.64%  Cg Size class  Grade, % Carbon
        -200              14.58%          Fine         99.02%     
200 - 100 mesh      23.68%          Small        100.00%    
    100-80 mesh           9.87%          Medium        100.00%    
    80-50  mesh           24.38%          Large        100.00%    
      >50 mesh            27.47%       Extra Large     100.00%    
    Total ( 200)          85.42%      Average Grade    99.86%

The samples in secure tagged bags were delivered directly to the analytical facility for analysis. In this case, the analytical facility was the ALS minerals in Val-d'Or, Quebec. The samples are weighed and identified prior to sample preparation. The samples are crushed to 70% minus 2 mm, then separated and pulverized to 85% passing 75microm. All samples are analyzed for Carbon Graphite using C-IR18.

Jean-Sebastien Lavallee (OGQ #773), Geologist, is a shareholder of both companies, Executive Chairman of the Board and exploration manager of Canada Strategic and a Qualified Person under NI 43-101, has reviewed and approved the technical content of this release.

In the interest of full disclosure, we call the reader's attention to the fact that Equities.com, Inc. is compensated by the companies profiled in the Spotlight Companies section. The purpose of these profiles is to provide awareness of these companies to investors in the micro, small-cap and growth equity community and should not in any way be considered as a recommendation to buy, sell or hold these securities. Equities.com is not a registered broker dealer, investment advisor, financial analyst, investment banker or other investment professional. We are a publisher of original and third party news and information. All profiles are based on information that is available to the public. The information contained herein should not be considered to be complete and is not guaranteed by Equities.com to be free from misstatement or errors. The views expressed are our own and not intended to be the basis for any investment decision. Readers are reminded to do their own due diligence when researching any companies mentioned on this website. Always bear in mind that investing in early-stage companies is risky and you are encouraged to only invest an amount that you can afford to lose completely without any change in your lifestyle. Equities has been compensated with cash, common shares and/or warrants for market awareness services provided.

DISCLOSURE: The views and opinions expressed in this article are those of the authors, and do not necessarily represent the views of equities.com. Readers should not consider statements made by the author as formal recommendations and should consult their financial advisor before making any investment decisions. To read our full disclosure, please go to: http://www.equities.com/disclaimer.

Market Movers

Sponsored Financial Content